How To Update Samsung S8600 Wave 3 Firmware

- Run Samsung S8600 Downloader ( Multiloader ) and select MSM7x30
- After you extract the firmware package you have to select the files in this order:

Amss: amss.bin
Apps: apps_compressed.bin
Rsrc1: Rsrc_S8600_Open_xxxxx_Common_Oxx.rc1
Rsrc2: Rsrc2_S8600(Low).rc2
Factory FS: FactoryFs_S8600_Open_xxxxx_Common_Oxx.ffs
SHP APP: ShpApp.app
CSC: CSC_S8600_Open_xxxxx_Common_Oxx.csc
FOTA: bplib_S8600OpxxxxxCommon.fota
DSP1: dsp1.bin
PFS: PFS_S8600_Open_Europe_Common_xxxxx.pfs

- Put the phone into Download Mode ( Volume Down + Menu + Power ).
- Connect USB cable to phone and PC and install drivers.
- Click Port Search button to check good connection.
- Click Download button and wait till the phone rebooted by the program.
- After the phone fully on make Full Reset: *2767*3855#.


Important Notice: In case you want to Update or Flash the Boot files of the phone you must check Full Download option in the program and click on Boot button to select the Boot files folder.
But updating the Boot area is very risky so keep that in mind.


good luck