1,2,3,5,17,21.
Tuesday, July 31, 2012
GPGDragon Pinout For HWK Repair
Here is difference between top picture and below picture.
HWK Pinout Difference
Top picture pinout.
1,2,3,5,17,21.
1,2,3,5,17,21.
RIFF JTAG - How to Unbrick/Repair Samsung Captivate - i897
Hi,
Here is simple manual to repair bricked Samsung Captivate i897 with RIFF Box:
1. Connect Your phone PCB to RIFF Box using this pinout :
2. Read the full flash backup, using these settings :
3. Save the file after reading is finished
4. Working boot file files from here and unpack it.
5. Open "boot_ok_ i897.bin" and write it using these settings :
6. Open "sbl_i897.bin" and write it using these settings :
7. Now assemble phone, press both volume buttons, insert battery and connect USB cable to phone and PC
8. You have download mode enabled, and You can flash phone using Odin and firmware file.
Here is simple manual to repair bricked Samsung Captivate i897 with RIFF Box:
1. Connect Your phone PCB to RIFF Box using this pinout :
2. Read the full flash backup, using these settings :
3. Save the file after reading is finished
4. Working boot file files from here and unpack it.
5. Open "boot_ok_ i897.bin" and write it using these settings :
6. Open "sbl_i897.bin" and write it using these settings :
7. Now assemble phone, press both volume buttons, insert battery and connect USB cable to phone and PC
8. You have download mode enabled, and You can flash phone using Odin and firmware file.
Saturday, July 28, 2012
FREE TOOL 0ne Click Pattern Unlock Sam Sung
- Connect Phone ON
- Select Your Port Com
- Connect Cable C3300K
- Press Button "Pattern Lock Unlock"
- Post Your Report Here
http://www.4shared.com/rar/DKr1mvY6/0ne_Click_Pattern_Unlock_Sam_S.html
- Select Your Port Com
- Connect Cable C3300K
- Press Button "Pattern Lock Unlock"
- Post Your Report Here
http://www.4shared.com/rar/DKr1mvY6/0ne_Click_Pattern_Unlock_Sam_S.html
Thursday, July 19, 2012
វិធីបង្ខំ Android Device ចួល Download Mode
សំរាប់ទូរស័ព្ទដែមមិនមានប៊ូតុងសំរាប់ចូល Download Mode ដូចជា T959 ខ្លះ
ចំលងចេញពី http://www.4khmer.com/index.php?topic=14919.msg50591;topicseen#msg50591
Monday, July 9, 2012
2610b rm87 to 2610 rm86 by mxkey
just flash with 2610 rh 86 latest version...
Write good pm of rh 86 2610
then unlock......
put capacitors as shown in picture instead of make jumpers....
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.x
ASIC ID: 0x3040 [UPP_4M ver: 4.1]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0001 2C7E [AMD S29NS128N,128 Mbits] page size: 128 K type: NOR area: 01000000-01FFFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78C0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0087595A
A3BDA66ASIC type: 11
UEM Imei: 01104000xxxxxx
Phone Type: RH-86 (Nokia 2610)
SW Version: V 06.70 16-11-07 RH-86 (c) Nokia.
Imei plain: 01104000xxxxxx
Product Code: 0540044
Cellular System: GSM
ASIC ID: 0x3040, type: 11
Ppm Id: MR
Language Pack:
- not available.
TimeStamp: 2007-11-21T05:50:05Z
SW Version: 06.70
Variant Version: 999
ProductProfile: RH86_0540044_06.70_999.spr
Simlock: 0540044_simlock.txt
Imei net: 01104000xxxxxx
Version: SIMLOCK SERVER VERSION 63
Provider: GSM Test Operator, Country: -
Counter: 0/3, 0/10
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 000000000001000B
BLOCK 1: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 2: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 3: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 4: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 5: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 6: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 7: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
Friday, June 29, 2012
How to Enter code LG VU CU915 & CU920 (Vu)
1. Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2. Enter *#865625# then the 16 digit unlock code
3. Device should say: Network Lock Deactivated
4. Phone may automatically reboot and is now unlocked !
Thursday, June 21, 2012
SAMSUNG Galaxy Tab JMC: *** Flashing Guide ***
I don't know if this process actually flash boot and spl because JM6
doesn't seem to have them, but you're on your own and I don't recommend
you to do it.
Ok I'm going to make a detailed guide of how this worked for me because succeed depends a lot on which firmware you have in your tab. It's a good idea to start with JM6 since you can flash it completely if you have an older firmware or JMA (I guess you won't be able to flash it in the future if a new firmware is released). You won't lose your internal SD Card data but your phone will be factory reset.
1) Download JM6 from here
You'll get Odin 1.7 + PIT + PHONE + PDA + CSC.
2) Download JMA from here: here
3) Download JMC from here: here
4) Start Odin 1.7 and select:
*PIT P1_SMD_MAP.pit
*REPARTITION YES
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: CODE_P1000XXJM6.tar.md5
*PHONE: MODEM_P1000XXJM6.tar.md5
*CSC: CSC_P1000OXAJM6.tar.md5
5) Put your TAB in download mode: Turn it off, press POWER + VOL DOWN
6) Press start in ODIN and wait until process is completed. Your tab will REBOOT in download mode.
7) Now press POWER + VOL UP and when you see SAMSUNG logo RELEASE POWER BUT KEEP PRESSING VOL UP in order to enter recovery and let the TAB flash dbdata, it'll reboot and boot into android. (unplug your USB cable because Odin won't recognize it on some systems)
8) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: JMA.tar (from JMA file obviously)
*PHONE: NONE
*CSC: NONE
9) Repeat 5), 6) and 7)
10) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: P1000XXJMC_P1000OXAJMC_P1000XXJMA_HOME.tar (from JMC file obviously)
*PHONE: NONE
*CSC: NONE
11) Repeat 5), 6) and 7)
I have an AT&T TAB and this process worked for me.
If you need 850 + 1900 you only have to flash MODEM (PHONE button in ODIN) from HERE (modem_bell_i9000.zip) with No PIT, no repartition, no PDA and no CSC.
I hope this helps anybody and sorry about my english
EDIT: If for some strage reason you get the !!! --- !!! screen in your tab, don't panic. You can start the whole process again, Odin will detect your phone, it's a download mode anyway.
EDIT2: I always choose to wipe all my data. I use Titanium backup and I can get most of my data back from there. It's better to have a functional tab than a brick full of useless data. Wiping will always be safer.
EDIT3: Made some modifications to step 7. What you need to do is to enter recovery and that's it. It wasn't clear. Now I think you'll get it right. I didn't test it without step 7 but some people seems to be doing well without doing step 7. Maybe device is entering recovery automatically and flashing dbdata on its own (this is to be expected but sometimes it just doesn't happen).
Copy from : http://forum.xda-developers.com/showthread.php?p=10026248#post10026248
Ok I'm going to make a detailed guide of how this worked for me because succeed depends a lot on which firmware you have in your tab. It's a good idea to start with JM6 since you can flash it completely if you have an older firmware or JMA (I guess you won't be able to flash it in the future if a new firmware is released). You won't lose your internal SD Card data but your phone will be factory reset.
1) Download JM6 from here
You'll get Odin 1.7 + PIT + PHONE + PDA + CSC.
2) Download JMA from here: here
3) Download JMC from here: here
4) Start Odin 1.7 and select:
*PIT P1_SMD_MAP.pit
*REPARTITION YES
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: CODE_P1000XXJM6.tar.md5
*PHONE: MODEM_P1000XXJM6.tar.md5
*CSC: CSC_P1000OXAJM6.tar.md5
5) Put your TAB in download mode: Turn it off, press POWER + VOL DOWN
6) Press start in ODIN and wait until process is completed. Your tab will REBOOT in download mode.
7) Now press POWER + VOL UP and when you see SAMSUNG logo RELEASE POWER BUT KEEP PRESSING VOL UP in order to enter recovery and let the TAB flash dbdata, it'll reboot and boot into android. (unplug your USB cable because Odin won't recognize it on some systems)
8) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: JMA.tar (from JMA file obviously)
*PHONE: NONE
*CSC: NONE
9) Repeat 5), 6) and 7)
10) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: P1000XXJMC_P1000OXAJMC_P1000XXJMA_HOME.tar (from JMC file obviously)
*PHONE: NONE
*CSC: NONE
11) Repeat 5), 6) and 7)
I have an AT&T TAB and this process worked for me.
If you need 850 + 1900 you only have to flash MODEM (PHONE button in ODIN) from HERE (modem_bell_i9000.zip) with No PIT, no repartition, no PDA and no CSC.
I hope this helps anybody and sorry about my english
EDIT: If for some strage reason you get the !!! --- !!! screen in your tab, don't panic. You can start the whole process again, Odin will detect your phone, it's a download mode anyway.
EDIT2: I always choose to wipe all my data. I use Titanium backup and I can get most of my data back from there. It's better to have a functional tab than a brick full of useless data. Wiping will always be safer.
EDIT3: Made some modifications to step 7. What you need to do is to enter recovery and that's it. It wasn't clear. Now I think you'll get it right. I didn't test it without step 7 but some people seems to be doing well without doing step 7. Maybe device is entering recovery automatically and flashing dbdata on its own (this is to be expected but sometimes it just doesn't happen).
Copy from : http://forum.xda-developers.com/showthread.php?p=10026248#post10026248
Subscribe to:
Posts (Atom)