1. Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2. Enter *#865625# then the 16 digit unlock code
3. Device should say: Network Lock Deactivated
4. Phone may automatically reboot and is now unlocked !
Friday, June 29, 2012
How to Enter code LG VU CU915 & CU920 (Vu)
1. Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2. Enter *#865625# then the 16 digit unlock code
3. Device should say: Network Lock Deactivated
4. Phone may automatically reboot and is now unlocked !
Thursday, June 21, 2012
SAMSUNG Galaxy Tab JMC: *** Flashing Guide ***
I don't know if this process actually flash boot and spl because JM6
doesn't seem to have them, but you're on your own and I don't recommend
you to do it.
Ok I'm going to make a detailed guide of how this worked for me because succeed depends a lot on which firmware you have in your tab. It's a good idea to start with JM6 since you can flash it completely if you have an older firmware or JMA (I guess you won't be able to flash it in the future if a new firmware is released). You won't lose your internal SD Card data but your phone will be factory reset.
1) Download JM6 from here
You'll get Odin 1.7 + PIT + PHONE + PDA + CSC.
2) Download JMA from here: here
3) Download JMC from here: here
4) Start Odin 1.7 and select:
*PIT P1_SMD_MAP.pit
*REPARTITION YES
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: CODE_P1000XXJM6.tar.md5
*PHONE: MODEM_P1000XXJM6.tar.md5
*CSC: CSC_P1000OXAJM6.tar.md5
5) Put your TAB in download mode: Turn it off, press POWER + VOL DOWN
6) Press start in ODIN and wait until process is completed. Your tab will REBOOT in download mode.
7) Now press POWER + VOL UP and when you see SAMSUNG logo RELEASE POWER BUT KEEP PRESSING VOL UP in order to enter recovery and let the TAB flash dbdata, it'll reboot and boot into android. (unplug your USB cable because Odin won't recognize it on some systems)
8) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: JMA.tar (from JMA file obviously)
*PHONE: NONE
*CSC: NONE
9) Repeat 5), 6) and 7)
10) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: P1000XXJMC_P1000OXAJMC_P1000XXJMA_HOME.tar (from JMC file obviously)
*PHONE: NONE
*CSC: NONE
11) Repeat 5), 6) and 7)
I have an AT&T TAB and this process worked for me.
If you need 850 + 1900 you only have to flash MODEM (PHONE button in ODIN) from HERE (modem_bell_i9000.zip) with No PIT, no repartition, no PDA and no CSC.
I hope this helps anybody and sorry about my english
EDIT: If for some strage reason you get the !!! --- !!! screen in your tab, don't panic. You can start the whole process again, Odin will detect your phone, it's a download mode anyway.
EDIT2: I always choose to wipe all my data. I use Titanium backup and I can get most of my data back from there. It's better to have a functional tab than a brick full of useless data. Wiping will always be safer.
EDIT3: Made some modifications to step 7. What you need to do is to enter recovery and that's it. It wasn't clear. Now I think you'll get it right. I didn't test it without step 7 but some people seems to be doing well without doing step 7. Maybe device is entering recovery automatically and flashing dbdata on its own (this is to be expected but sometimes it just doesn't happen).
Copy from : http://forum.xda-developers.com/showthread.php?p=10026248#post10026248
Ok I'm going to make a detailed guide of how this worked for me because succeed depends a lot on which firmware you have in your tab. It's a good idea to start with JM6 since you can flash it completely if you have an older firmware or JMA (I guess you won't be able to flash it in the future if a new firmware is released). You won't lose your internal SD Card data but your phone will be factory reset.
1) Download JM6 from here
You'll get Odin 1.7 + PIT + PHONE + PDA + CSC.
2) Download JMA from here: here
3) Download JMC from here: here
4) Start Odin 1.7 and select:
*PIT P1_SMD_MAP.pit
*REPARTITION YES
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: CODE_P1000XXJM6.tar.md5
*PHONE: MODEM_P1000XXJM6.tar.md5
*CSC: CSC_P1000OXAJM6.tar.md5
5) Put your TAB in download mode: Turn it off, press POWER + VOL DOWN
6) Press start in ODIN and wait until process is completed. Your tab will REBOOT in download mode.
7) Now press POWER + VOL UP and when you see SAMSUNG logo RELEASE POWER BUT KEEP PRESSING VOL UP in order to enter recovery and let the TAB flash dbdata, it'll reboot and boot into android. (unplug your USB cable because Odin won't recognize it on some systems)
8) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: JMA.tar (from JMA file obviously)
*PHONE: NONE
*CSC: NONE
9) Repeat 5), 6) and 7)
10) Open Odin 1.7 again or press RESET and select:
*PIT: NONE
*REPARTITION NO
*AUTO REBOOT YES
*F. RESET TIME YES
*PDA: P1000XXJMC_P1000OXAJMC_P1000XXJMA_HOME.tar (from JMC file obviously)
*PHONE: NONE
*CSC: NONE
11) Repeat 5), 6) and 7)
I have an AT&T TAB and this process worked for me.
If you need 850 + 1900 you only have to flash MODEM (PHONE button in ODIN) from HERE (modem_bell_i9000.zip) with No PIT, no repartition, no PDA and no CSC.
I hope this helps anybody and sorry about my english
EDIT: If for some strage reason you get the !!! --- !!! screen in your tab, don't panic. You can start the whole process again, Odin will detect your phone, it's a download mode anyway.
EDIT2: I always choose to wipe all my data. I use Titanium backup and I can get most of my data back from there. It's better to have a functional tab than a brick full of useless data. Wiping will always be safer.
EDIT3: Made some modifications to step 7. What you need to do is to enter recovery and that's it. It wasn't clear. Now I think you'll get it right. I didn't test it without step 7 but some people seems to be doing well without doing step 7. Maybe device is entering recovery automatically and flashing dbdata on its own (this is to be expected but sometimes it just doesn't happen).
Copy from : http://forum.xda-developers.com/showthread.php?p=10026248#post10026248
Tuesday, June 12, 2012
HOW TO CHANGE PRODUCT LOCATION
-ដំបូងយើត្រូវបើក កម្មវិធី Phoenix រួចហើយចុចលើពាក្យ Tools / Options / Product Location ពេលនោះនិងលោតផ្ទាំងមួយមក មើលរូប :
-បន្ទាប់មកយើង Selects លើ Location ដែលយើចងប្តូរ រួចចុចលើពាក្យ Del (លុបចោល) រួចហើយយើងចុចលើកពាក្យ Add ដើម្បី Brow ទៅរកទីតាំង C:\Program Files\Nokia\Phoenix រួចហើយចុចលើពាក្យ Apply ។
-បិទកម្មវិធី Phoenix រួចបើមកវិញ ជាការស្រេច ។
-បន្ទាប់មកយើង Selects លើ Location ដែលយើចងប្តូរ រួចចុចលើពាក្យ Del (លុបចោល) រួចហើយយើងចុចលើកពាក្យ Add ដើម្បី Brow ទៅរកទីតាំង C:\Program Files\Nokia\Phoenix រួចហើយចុចលើពាក្យ Apply ។
-បិទកម្មវិធី Phoenix រួចបើមកវិញ ជាការស្រេច ។
Wednesday, June 6, 2012
SAMSUNG A707 unlock by flashing z3x
-So I've decided to flash phone with this: A707 Unlocked
-Check option "CRP FILE" in job option.
-Load flashfile
-Switch phone to flash mode (9+PWR) or connect phone in normal mode via USB cable.
-Install drivers if necessary.
-Press Flash button.
..:: រីករាយថ្ងៃទី06 ខែ06 ឆ្នាំ2012 ::..
ម៉ោង 10: 56នាទី ថ្ងៃទី06 ខែ 06 ឆ្នាំ2012 កំណើតរបស់ ប្លុកថ្មីរបស់ខ្ញុំ រីករាយសំរាប់អ្នកមកដល់ ទីនេះ :)
ដោយសារខ្ញុំមានភាពភ្លេចភ្លាំងច្រើន សូមបីតែអក្សរខ្មែរក៏សរសេរលែងចង់ត្រូវដែល ពិតជាខ្មាស់គេមែន ក៏នឹកឃើលចង់បង្កើតប្លុកមួយ។ ទុកគ្រាន់ជាដំណោះស្រាយសំរាប់ខ្លួនឯងផង នាក់ចូលមកដល់ទីននេះ។ ហើយក៏សូមអរគុណដល់បង .:: ចំណាន::. ដែលជួយប្រាប់ពីរបៀបបង្កើតប្លុក។
បើមានភាពខុស ឬ ក៏សូមជួយរិះគន់ ក្នុងន័យស្ថាបនាផង ដោយក្តីអនុគ្រោះ សូមទំនាក់ទំនងមក townbattambang@yahoo.com or Skype: Khmer Solved
Subscribe to:
Posts (Atom)