iPhone IMEI Carrier Check : 1$ / skype : samnang2002 / Tell: +855 17611991 , Cambodia.

Monday, August 18, 2014

[TUT]MTK Android (Sp flash tool ) tutorial

SP Flash Tool are for SmartPhone products
MT6573\72 Innovative Platform for Mainstream Smartphones
MT6575 Dual-SIM smartphone platform for the mainstream market
MT6577 1 GHz Dual-Core Smartphone Platform
MT6582 Quad-Core Cortex-A7 1.2GHz+CPU Smartphone Platform
MT6589 Quad-Core Cortex-A7 1GHz+CPU Smartphone Platform

MTK Flash Tool is for Feature Phone chips
MT6223 GSM/GPRS solution for ULC/ULC+ market
MT6235 GSM/GPRS/EDGE solution for Mainstream Multimedia
MT6236 GSM/GPRS/EDGE Feature- rich Multimedia solution
MT6238 GSM/GPRS/EDGE Premium Multimedia solution
MT6239 GSM/GPRS/EDGE Premium Multimedia solution
MT6250 Single- Chip GSM/GPRS/EDGE- RX entry- multimedia solution
MT6252 GSM/GPRS/EGPRS entry- multimedia single chip solution
MT6253 Single- Chip GSM/GPRS entry- multimedia solution
MT6255 Single- Chip GSM/GPRS/EDGE- RX Smart Feature Phone solution
MT6268 High- end EDGE/GPRS/WCDMA Feature Rich Multimedia Phone Solution
MT6276M HSPA Data Modem Solution
MT6516 EDGE/GPRS Feature Rich Multimedia Smart Phone Entry Solution

Original link

Wednesday, June 25, 2014

EASY-JTAG Update. 1.5.0.0. Easy-jtag 1 year Birthday update. Boom & Exclusive Update.


YES. Most wanted solution for n7100,i9300.
Now you can repair 90% of all bad EMMC VTU00M.


First in the world


We have done our next big solution:

- Repair EMMC VTU00M rev 0x56, name:0000 repair!!! (intermal firmware emmc fix) - repair stage 1
- Repair EMMC VTU00M rev 0xF1 not operable for read and write operation (intermal firmware emmc fix) - repair stage 2

VTU00M with name 0000 repair require two stages:
- repair mode 1 can recover emmc name
- repair mode 2 can recover emmc normal read/write functionality
between those two modes emmc require reconnect power


HOW TO:

if you have VTU00M with non damaged name but not operable for read/write only repair mode 2 need to do.

After press ‘VTU00M repair' all related operation for repair or selection repair mode 1 or repair mode 2 will apply automatically
just read carefully log when requested EMMC power reconnect.

After success repair (when repair mode 2 done) emmc vtu00m can be checked with S.M.A.R.T report function
If smart report is normal and not invalid emmc i fully operable!!!
Just change correct rom2/rpmb size if needed
Make emmc bootable (set boot config 0x48, boot bus config 0x1)
Write rom1 and rom2 partition and phone are ready for odin flashing
Enjoy

P.S. vtu00m emmc with 'ready timeout error' can not be recovered anymore - totally dead EMMC.

P.S2 . Easy-jtag users, lets make money.
If you not have easy-jtag, make oder EASY-JTAG from your resellers today!!!!
Poll up your dead EMMC VTU00M.

P.S3. Someone still think exist BETTER and FASTER EMMC TOOL in market?

Saturday, January 25, 2014

How to install rom zip 4.0.4 Sony ST18i ( xperia ray )

I. install ClockworkMod:

    Install X-Parts from Google Play.

    After installation, open the app and select the Installs tab.

    Select Install CWM and follow on-screen instructions.

    You can Reboot into the recovery mode from there (press the button in the Tools Tab)

.
II. install boot.img:

Now you need to install the boot.img from the your rom Zip:

    Connect your device into fastboot again with Vol-Up While plugging in the USB-Cable
    fastboot devices
    (Seeing your serial number means we know all is good.)

    Now type these commands:

    fastboot erase system -w
    fastboot erase boot

    then copy the boot.img in the same folder as fastboot.exe and type

    fastboot flash boot boot.img
    fastboot reboot

    Now press the Vol-Down Button to enter the Recovery Mode again and install your image

.
III. Install your rom in Recovery Mode:

    Once the device boots into the ClockworkMod Recovery, use the physical volume buttons to move up and down. On most devices, the power button is used to confirm your selection, although for some devices the power button is used as a "back" button to go up one level, in which case the home button is used to confirm the selection.
    Optional/Recommended: Select backup and restore to create a backup of the current installation on the Xperia Ray.

    Select the options to "wipe data/factory reset" and "wipe cache"
    Select "Install zip from sdcard"
    Select Choose the your rom zip from sdcard.
    Select the your rom zip file you placed on the sdcard. You will then need to then confirm that you do wish to flash this file.

    Install the Google Apps package as well

    Optional: Install any additional packages you wish using the same method.

Once the installation has finished, return back to the main menu, and select the reboot system now.

Friday, January 17, 2014

Delete iCloud on iOS 7 No need pass

Delete iCloud on iOS 7 No need pass
Along with the great improvement in security features " Activetion Lock" by iCloud account which gives iOS7 few users are not annoyed with this feature if you forgot password iCloud .

In this article , I will show you how to delete iCloud account without password on devices running iOS7 are normally used for the user accidentally forgot password of iCloud account you want to delete .

Step 1 :

Turn off all network connections including Wi-Fi + 3G + mobile data

Wifi Off

Turn off 3G + mobile data

Step 2 :

Go to iCloud from the Settings > iCloud > Account and delete the password box blank

Click " Done " and press " Oke " in the bulletin board and then press " Cancel "

Step 3 :

Go to " Contacs " from " On " to "OFF " and select " Delete from My iPhone " when a notification

Step 4 :

Select " Delete Account " and continue to select " Delete from My iPhone " when a notification

Results:

Previous iCloud account was deleted and you may
other iCloud account login in order to continue using .

Note:

- The above can only be used with devices running iOS7 are normally used
- When Firmware Restore or Reset device by selecting " Erase All Content and Settings " will still have to enter the password of the old account to iCloud , the new Active unusable

Monday, December 16, 2013

How To Exit Safe Mode With Samsung Phones

1)Open Root Explorer
2)Navigate To "efs/FactoryApp/"
3)Open "FactoryMode" File As Text And Edit It

"FactoryMode"----OFF

Need To ON FactoryMode

4)Open "Keystr" File As Text And Edit It

"Keystr" -----OFF

Need To ON "Keystr"

5)Reboot Phone
6) Enjoy